Learn to maintain glass
1. Do not forcefully collide with the glass surface during normal times. To prevent scratches on the glass surface, it is best to lay a tablecloth. When placing things on glass furniture, handle them gently and avoid collisions.
2. During daily cleaning, simply wipe with a damp towel or newspaper. In case of stains, use a towel dipped in beer or warm vinegar to remove them. Alternatively, use glass cleaning agents available on the market. Avoid using solutions with strong acidity or alkalinity for cleaning. In winter, the glass surface is easy to frost, so it can be wiped with a cloth dipped in strong salt water or Baijiu with good effect.
3. Once the patterned frosted glass gets dirty, you can use a toothbrush dipped in cleaning agent to wipe it in circles along the pattern to remove it. In addition, you can also drop some kerosene on the glass or apply chalk ash and gypsum powder dipped in water on the glass to dry, and then wipe it with a clean cloth or cotton, so that the glass is both clean and bright.
4. Glass furniture is best placed in a relatively fixed place and should not be moved back and forth casually; To place objects steadily, heavy objects should be placed at the bottom of glass furniture to prevent the furniture from tipping over due to unstable center of gravity. In addition, it is necessary to avoid moisture, stay away from stoves, and isolate from chemical reagents such as acids and alkalis to prevent corrosion and deterioration.
5. Using cling film and a damp cloth sprayed with detergent can also give new life to glass that is often stained with oil. Firstly, spray the entire glass with cleaning agent, then apply cling film to soften the solidified oil stains. After ten minutes, remove the cling film and wipe it with a damp cloth. To keep the glass smooth and bright, it is necessary to regularly clean it by hand. If there are any marks on the glass, you can rub it with a rubber soaked in water, and then wipe it with a damp cloth; If there is paint on the glass, it can be cleaned with cotton dipped in hot vinegar; Wipe the glass with a clean dry cloth dipped in alcohol to make it shiny like crystal.
Precautions
1. In order to avoid unnecessary losses during transportation, it is necessary to pay attention to fixing and adding soft pads. It is generally recommended to transport it vertically. Vehicles should also pay attention to maintaining stability and slow speed.
2. If the other side of the glass installation is sealed, it is important to clean the surface before installation. It is best to use a specialized glass cleaner and wait until it has dried completely to confirm that there are no stains before installation. It is recommended to use clean construction gloves during installation.
3. The installation of glass requires the use of silicone sealant for fixation, and in the installation of windows, it also needs to be used in conjunction with rubber sealing strips.
4. After the construction is completed, attention should be paid to adding collision warning signs, which can generally be indicated by non dry stickers, colored electrical tape, etc.
5. Do not collide with sharp objects
Wipe the glass
1. Wipe the glass: First, use a towel to clean the glass frame, then use a glass scraper to dip it in diluted glass solution, evenly apply the glass from top to bottom, and repeat the above process. Use a glass scraper to wipe clean from top to bottom, and use a dry towel to wipe off any water marks left on the frame. The water marks on the glass must be wiped clean with the glass, otherwise it will leave marks on the glass one after another.
2. Mix vinegar and water in a ratio of 1:2, put them into spray, spray them on the glass and wipe them, and they will be very clean.
3. Add 5% ammonia solution or gasoline to a basin, clean the glass with it, wait for the glass to dry slightly, and then wipe it clean with a dry cloth. The glass will be spotless, shiny and transparent. When cleaning the glass, different models of window cleaners can be used to determine whether it is for double layered or single layered glass. Using a window cleaner is convenient, labor-saving, and safe.
4. If there is mold on the surface of the glass, mix hydrofluoric acid (HF) with water in a ratio of 1:8 (note: exceeding 1:8 may cause damage to the hands), and wipe the glass. Attention: Be sure to do a good job of corrosion protection, and do not let your skin come into contact with HF, otherwise it will cause serious corrosion! After wiping the glass, wipe it again with clean water and finally dry the glass.
